How To Clean Blender Blades – Explained in Detail

Just like any other essential tool in the kitchen, the blender is necessary for us. Using it, you can easily make juice for your beloved family. Making juice at home is always safe.
On the other hand, you don’t have to worry about the qualities and the chemical issues here, because you make it all by yourself at home. But it becomes the most significant concern when the dirt gathers in the blades of the blender.
How to clean blender blades now became the biggest question for housewives around the world. As a caring mother, you surely don’t want your beloved one to feed juice made by a crummy blender.
The blender gets dirt most of the time because of the remaining pieces of fruits stuck on the blade. And, this is why housewives are finding a way out on how to clean blender blades.
In this article, we will try to provide you solutions on how to clean the blender blades. We will also give you tips on how to clean the whole blender machine and keep it limpid and enduring for a more extended period.

How to clean blender blades?

Not every blender provides you the convenience of having auto-clean features. In that case, you have to clean it all by yourself. And, the blades are the most critical parts of the blenders we know.
The best way to clean the blades is to separate them from the blender. While cleaning the blender blades, you need some products to use. Take a glance at the essential supplies.

Supplies that are needed:

  • Hot water.
  • Mild dish soap or apple cider vinegar.
  • Sponge or dishrag.
  • Polident tablets. (Optional)
  • A pot.
We will complete the process in two steps. At first, distinguish the blades out of the blender carefully. In the process, you have to separate all parts of the blender, though.
We will provide you the instruction of cleansing all the parts later on. Now focus on how to clean blender blades.

Step 1

Pour the mild dish soap or apple cider vinegar into the pot of hot water. Put the blade on the pot, and wash it carefully.
Use a sponge if it’s needed. After washing the blade a couple of times for a couple of minutes, take it out of the pot and dry it with a towel. Be careful with the sharp blade.
If the blade still seems dirty after it, go forward to the at step.

Step 2

Bring some Polident Tablets and mix with water. Put the blade into the pot and scrub it with the sponge or dish rag until it becomes crystal clear on your eyes. We are warning you once again about the sharp blade. Don’t forget to be aware of this.
We hope you get to know how to clean blender blades. With the information on how to clean blender blades, you also need to know how to clean the carafe and the base effectively.

How to clean the blender machine?

Before going for the blade, you can try this mantra at the beginning of your operation to clean blender blades. It is also essential to keep the carafe and the base neat and clean along with the blade. Therefore, we will explain it from apart for the convenience of your perception.

Cleaning the carafe:

We will show you several ways of cleaning the carafe. Let’s start with blending the dish soap.

Formula 1

Boil water and fill the carafe halfway. Pour a few drops of liquid dish detergent on it. Turn on the blender in a low mode and keep it on until the water reaches the whole carafe. When it’s done, pour the mixture of the dish out and rinse it sincerely.
[Note: Make sure whether the liquid is secure]

Formula 2

Use lemon for better results. Fill the carafe halfway with water along with the dish soap, just like before. Then, leave two sliced lemons in water. Blend the mixture for a couple of minutes. That’s it. You will get a crystal clear carafe after this.
[Note: You can use a few drops of white vinegar in place of lemon. It will be as effective as lemon though it won’t be spreading a lovely fragrance]

Cleaning the base

Cleaning the base is going to be the easiest way of all. Pick a towel or sponge, soak it in warm water and wring it out forcefully.
Run the towel or sponge (whatever you have) gently over the base. Areas with dried or caked-on blended matter need your special attention as well.
It might get challenging to get out everything when you are cleaning the blender’s control interface. At this, use alcohol and some pieces of cotton buds to clean the stains on that particular place.
[Note: Don’t let a drop of water go into the base. Be very cautious about it]
As we already show you how to clean blender blades, we would like to go to this article’s next part. The part with some valuable tips to increase the mobility of your blender and keep it clean.

Tips to keep the blender fresh and clean

The tips we are giving below might get you out of trouble sometimes. Read it carefully because it might get handy while cleaning the blender. The only way to keep your blender enduring, neat, and clean is by keeping our tips in mind.
  • Unplug the appliance and detach all the accessories while cleaning the blender.
  • When the appliance is not in use for a long time, keep it well ventilated.
  • Unplug the blender when it is not in use. It will save your electricity as well.
  • Keep the blender in a dry area.
  • Do not let children use the blender.

Conclusion

As we are at the ending part of the article, we would like to inform you about the most important things to keep your blender clean. As we are at the ending part of the article, we would like to inform you about the most important things to keep your blender clean.
If you wash it with dish detergent and scrub it repeatedly after blending juice every time, you can keep your blender clean and long-lasting.
It is the most important thing because if the stain lasts long into your blender, it gets more and more challenging to wash out.

Leave a Comment